All Products

• 
• Automatic Handpiece Holder Valve
  Part#:6.21.01.068
  

  Sided port, Normally closed. Nickle plated brass. Port barbs for 1/16" O.D. tubing. Part#:6.21.02.069 is Normally Open.

• 
• Automatic Handpiece Holder Valve
  Part#:6.21.03.070
  

  Rear port, Normally closed. Nickle plated brass. Port barbs for 1/16" O.D. tubing. Part#:6.21.04.071 is Normally Open.

• 
• Micro Switch for Handpiece
  Part#:6.22.01.000
  

  Handpiece Holder Valve , Normally closed. Port barbs for 1/16" O.D. tubing. Part#:6.22.02.000 is Normally Open.

• 
• Needle Valve
  Part#:6.25.01.000
  

  Flow control adjustment for air or water. Body with one nickel plated panel mounting nuts. Barbs connect to any 1/16 " O.D. tubing.

• 
• Needle Valve
  Part#:6.26.01.000
  

  Flow control with screw adjustment for air or water. Body with two nickel plated panel mounting nuts. Barbs connect to any 1/16 " O.D. tubing.

• 
• Pinch Valve
  Part#:6.27.01.000
  

  Variable restriction for air and water . Body with two 15/32-32 thread nickel plated panel mounting nuts. Accommodates 1/8” O.D. or 1/4&rdquo

• 
• Mini Pinch Valve
  Part#:6.27.03.000
  

  The pinch valves promotes a compact design with a small Knurled Knob. Variable restriction for air and water. Accommodates 1/8” O.D. or 1/4&r

• 
• Barb, Plated, 1/16” X 10-32 Thread
  Part#:7.17.09.025
  

  Plated Barb 1/16 Inch X 10-32 Male Thread. Special Note: Intended Usage Of 1/16 Inch Barb Is 1/8 Inch O.D Tubing.

• 
• Hex Plug, Plated, 10-32 Male
  Part#:7.18.09.000
  

  Hex Plug, Plated, 10-32 Male Thread.

• 
• Nylon Washer
  Part#:7.14.08.012
  

  Washer, Nylon, For 10-32 or M5 Fitting.

• 
• Diaphragm
  Part#:3.00.66.074
  

  Replacement diaphragm for Part#:6.02.01.000 Handpiece Control Block. Diaphragm size is 51.50mmX31.80mmX0.33mm.

• 
• 3-Way Toggle Valve
  Part#:6.31.01.000
  

  The Standard is a compact Normally Closed design with detented Toggle Handle.Exhausting use for air only. Hex body with 10-32 Female porting and wo

First | Previous | Next | End   5/6